Mirror spark machine is a kind of processing equipment, mainly based on metal and other materials, it is through a discharge mode to achieve the processing effect, this way is also a unique way of mirror spark machine, but it is a little high requirements for installation and processing conditions, what is the specific together to see.

1. In order to ensure the accuracy of the mirror spark machine, the ground vibration is allowed to be 40 decibels. When the vibration exceeds this range, the infrastructure project needs to activate the anti-vibration or vibration motor to a smaller location.

2. The spark machine should be placed in a place with less dust, because the grinding machine, sandblasting machine and other equipment will produce metal particles and dust, which is easy to accumulate on the circuit board, causing machine failure. Metal particle dust is also easy to cause the screw and guide rail of the spark machine wear.

3. The temperature of the mirror spark machine should be controlled between 15-30°, and the humidity should not exceed 75%. The constant temperature should be ensured when processing.

4. The mirror spark machine is placed in an environment without acid and other chemical corrosive gases. The harsh gas environment will have a certain impact on the transmission mechanism of the machine tool.

5. Three-phase power supply 380V± 10%, non-neutral ground resistance < 1s, the current protection switch cannot be shared with other devices.

6. The installation site of mirror spark machine should be equipped with fire safety equipment.

7. Electromagnetic interference may occur in electronic processing systems. Devices such as televisions and radios should be kept away as far as possible.